BKPXD - REZKLAD HI-BUILD THINNER, 0342355

Product Identification

Product ID:REZKLAD HI-BUILD THINNER, 0342355
MSDS Date:08/11/1989
FSC:6850
NIIN:00N015158
MSDS Number: BKPXD

Responsible Party
ATLAS MINERALS & CHEMICALS INC
FARMINGTON ROAD
MERTZTOWN, PA 19539-0038
US

Emergency Phone: 215-682-7172

Info Phone: 215-682-7171

Cage: 04503

Contractor
ATLAS MINERALS & CHEMICAL INC
MERTZTOWN, PA 19539-0038 US

Telephone: 215-682-7171

Cage: 04503

Ingredients

NITROETHANE

CAS: 79-24-3

RTECS: KI5600000

Fraction By Weight: <40%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM; 9192


1-NITROPROPANE

CAS: 108-03-2

RTECS: TZ5075000

Fraction By Weight: >60%

OSHA PEL 25 PPM

ACGIH TLV: 25 PPM; 9192

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CONTACT MAY CAUSE IRRITATION.
SKIN: PROLONGED OR REPEATED CONTACT MAY CAUSE MODERATE IRRITATION.
INHAL: INHAL OF VAPORS CAUSES HDCH, NAUSEA, NARCOSIS, VOMITING.
CHRONIC: MAY CAUSE KIDNEY AND LIV ER DAMAGE.
Explanation of Carcinogenicity:NONE.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS, ALLERGIES.

First Aid

First Aid:EYES: FLUSH WITH CLEAR WATER FOR AT LEAST 15 MINUTES, GET MD.
SKIN: WASH CONTACT AREA WITH MILD SOAP AND WATER. IF IRRITATION
DEVELOPS, GET MD. INHAL: REMOVE VICTIM TO FRESH AIR. IF BREATHING
STOPPED, BEGIN ARTIFICIAL RESPIRATION. INGEST: INDUCE VOMITING.

Fire Fighting

Flash Point Method:TCC
Flash Point:94.0F,34.4C
Extinguishing Media:CO*2, FOAM, WATER SPRAY, TRICLASS ABC DRY CHEMICAL
ONLY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE INEFFECTIVE, COOL SURROUNDING
AREA WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:DO NOT USE BICARBONATE DRY CHEMICAL
EXTINGUISHERS.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT, VENT AREA, WEAR
PROT EQUIP. DIKE AREA OF SPILL AND PUMP LIQUID INTO SALVAGE TANK
AND FLUSH THE SPILL AREA WITH WATER OR ABSORB IN WITH AN INERT
MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND
FLAMES. KEEP CONTAINERS CLOSED. AVOID STORING IN DIRECT SUNLIGHT.
FOR INDUSTRIAL USE ONLY.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR MASK IF TLV IS
EXCEEDED OR USED IN CONFINED AREAS.
Ventilation:LOCAL: PROVIDE ADEQUATE VENTILATION TO KEEP EXPOSURE BELOW
TLV. MECHANICAL: ACCEPTABLE.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:251F,145C
Vapor Pres:13 @ 88F
Vapor Density:2.6-3.0
Spec Gravity:1.01
Evaporation Rate & Reference:SAME AS BUTYL ACETATE
Solubility in Water:2.6%
Appearance and Odor:CLEAR COLORLESS LIQUID, MILD CHARACTERISTIC ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
LEAD, COPPER OR THEIR ALLOYS, STRONG ALKALIS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO AND/OR CO*2 AND NO*X.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.